Precautions For Transporting Chillers

The chiller needs to continue to store before the equipment to take the following preventive measures: do a good job of maintaining the electric control cabinet and the operation screen to avoid damage. Store industrial chiller units in a monotonous, non-sensational, safe local area. Check the refrigerant circuit pressure at least once every three months to verify that there is no change in the refrigerant charge. If any abnormality is found, please contact the corresponding Gukang sales department for the appropriate repair part.

The second is the selection of the orientation of industrial chiller equipment, the shape scale and equipment foundation of the chiller, the supply of quiet non-deformed equipment or a concrete foundation with strength and quality to support the working component of the unit (including the completion of the equipment and the refrigerant, oil and water fully filled with tanks). The working component is shown in the parameter specification of Gukang industrial chiller, and the specific appearance scale and equipment basis of the unit are shown in the annex.

The unit should be installed in an area away from the noise sensitive area and the shock absorbing pad should be installed under the bracket of the industrial chiller. Neoprene rubber shock absorbing pads are recommended for shock absorbing pads. This neoprene rubber shock absorber pad meets most equipment requirements. For more demanding equipment, consult an acoustic engineer if you need further specific materials for shock absorbing pads.