How To Prevent The Cutting Performance Of Fiber Laser Cutting Machine From Declining?

With the development of laser cutting technology, fiber laser cutting machines have been widely used. During use, we will also find some problems, such as slower cutting speed, worse cutting accuracy, etc. This may be because the fiber laser cutting machine has been used for a long time. Loss is caused during use, which in turn affects the cutting performance. Let's analyze the reasons for the decline in cutting performance of fiber laser cutting machines.
1.Power: After the machine is used for a long time, the laser power will decrease more or less, which will directly affect the cutting performance of the laser cutting machine;
2.Distance: The distance between the workpiece and the nozzle also affects the cutting effect of the laser cutting machine, so the appropriate distance must be adjusted so as not to affect the cutting performance;
3.Position: The focus position directly affects the cutting progress. The diameter of the focus spot should be as small as possible, thereby producing a narrow cutting slit. If the cutting performance decreases, adjusting the focus position is a good method;
4. Long-term overload production, lack of maintenance and improper operation by operators are all reasons for the decline in the performance of cutting equipment.
In summary, we have found the reason for the decline in laser cutting machine performance, then we can prescribe the right medicine and take preventive measures to avoid or slow down the decline in cutting performance in a timely and effective manner.
1. Pay attention to the maintenance of the machine at ordinary times. Long-term processing of fiber laser cutting machines will cause wear and tear of parts, which will inevitably affect the cutting performance of the machine. Therefore, daily maintenance is very important. Daily maintenance can be carried out according to the daily maintenance table of the production company.
2. Standardize operating machines. Nowadays, larger manufacturers of fiber laser cutting machine production equipment will ask customers to arrange for dedicated personnel to receive training on the machine operating procedures. Only after the training is passed, they will be assigned to work. Operation of dedicated personnel is not only conducive to the normal operation of the fiber laser cutting machine, but also effectively avoids safety problems.